A Sheath for my Axe
Last year I learned how to forge an axe head, tutored by the brilliant Nic Westermann at the Greenwood Guild. After two days of intensely hard work, learning to swing a sledgehammer with absolutely no holding back, discovering who the blacksmith really is*, and carving the handle, I had a hand axe to be proud of.
The axe is razor-sharp and has long needed a sheath for the head, so last night I decided to make one. After trying an over-complicated design I came up with something very simple and effective. Here’s the finished item, showing how the head neatly slots in, and the cardboard template I used.
When you’re making a simple sheath like this the template just needs to be about 5-10 mm bigger than the blade, depending on blade thickness.
And here it is fastened. A couple of scraps of 2mm leather, some dark brown dye, carved a little edge detail, punch the stitch holes, stitch with waxed cord, edge-burnished with gum tragacanth, a wipe with resolene, measure and punch and fit the snap fastener, and there you go.
~
* Like many people I assumed it was the person swinging the sledge, but it is actually the one holding and turning the work on the anvil. The other guy is just muscle. We took turns.
Comments
A Sheath for my Axe — No Comments
HTML tags allowed in your comment: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>